Single-side anchors
1.LOOP ANCHOR
This is a loop shaped concrete anchor designed for strong and reliable fixing in reinforced concrete.
Product description
◎ The anchor is made of a threaded rod 15, 20 or 26mm.
◎ The anchor with the possibility of bending and welding.
◎ Before commencing concreting of the bottom slab, a loop anchor should be installed.
◎ The extension of the anchor is made by cones, connecting nuts or anchor fittings.
The Benefits:
◎ Loop shape provides secure mechanical anchorage in concrete
◎ Easy and quick installation on site
◎ Good load transfer with reliable performance in reinforcement and formwork applications
2.HOOK ANCHOR
This is a hook shaped concrete anchor designed for strong and reliable fixing in reinforced concrete structures.
Product description
◎ The anchor is made of a threaded rod 15, 20 or 26.
◎ The anchor with the possibility of bending and welding.
◎ A wide range of use in construction as with a corrugated anchor – it is ideal for smaller wall thicknesses.
The Benefits:
◎ Hook shape provides good mechanical anchorage in concrete
◎ Easy and fast installation for formwork and reinforcement work
◎ Reliable load transfer with minimal embedment
3. WOBBLE ANCHOR
This is a short concrete anchor with a unique wavy (wobble) shape that provides strong bond and bracing in concrete.
Product description
◎ The anchor is made of a threaded rod 15, 20 or 26.
◎ The anchor with the possibility of bending and welding.
◎ Used for single use in concrete (stay-in-place anchor).
◎ Can be used with a cone, e.g. when using the sliding formwork.
The Benefits:
◎ Very short embedment length thanks to the special wavy shape — strong bond with minimal depth
◎ Fast and simple installation as a bracing anchor in concrete
◎ Good bond behavior for reliable fixing in formwork and reinforcement applications
BACK 
