Steeland concrete are inherently strong. The effectiveness of reinforced concrete comes from the difference in performance of these two materials under similar loading conditions.Concrete itself is a relatively strong material that can withstand a lot of compression, but is relatively very wea...
Nowadays,rebar rock bolttunnel support technology has become an indispensable technology in coal roadway support. In the supporting system, rebar rock bolt is the most widely used product. Here are some details of how high quality rebar rock bolt is manufactured:Rock bolt Tun...
Tensile Strength of Thread BarThe tensile strength of thread bar and the compressive strength of concrete are the two main strength parameters we consider in structural designs.We use THREAD BAR where the concrete is subjecting to tensile stresses and when it does not strong enough to act along to c...
Form ties (sometimes referred to as tie bolts/tie rods) connect opposite faces of wall formwork to restrain the applied concrete pressures. They transmit loads in tension between stiff vertical and/or horizontal members associated with the main formwork.The principal types of systems of tie rods tha...
https://www.fastenerfairglobal.com/Fastener Fair Global 20239th International Exhibition for the Fastener and Fixing Industry21 - 23 March 2023 Messe Stuttgart, GermanyFastener Fair Stuttgart becomes Fastener Fair Global!Fastener Fair Global is the international trade exhibition for manufactur...
YIDAO post-tensioning bars are an integral part of modern post-tensioning solutions in bridge construction, structural engineering, and the retrofitting of existing structures.The YD post-tensioning system consist of Fully Threaded Hot Rolled, heat treated, stretched and tempered high strength 150 k...
Micropiles are small diameter, bored cast-in-place piles, with most of the applied load being resisted by steel reinforcement. They are constructed by drilling a borehole, often using casing, then placing steel reinforcement and grouting the hole. Micropiles have a wide range of uses and are becomin...
Epoxy-Coated steel reinforcing bar, also called corrosion resistant bar or epoxy coated rebar. It is one kind of reinforcing steel bars. Because epoxy coating is a barrier system intended to prevent moisture and chlorides from eroding surface of the reinforcing bar, it increases rebars corrosion per...
Short bolts are needed to connect a standard sheet pile wall or a modular sheet pile wall to a load distributing double channel beam, This can be done with THREADBAR (High strength thread bar).The required length of the bar depends on the height of the sheet pile profile, the width of the beam, the...
What is epoxy coated rebar?Epoxy coating is being used for extreme corrosive environments such as marine type buildings, and permanent anchorages. Different type and thickness of coatings are available upon request.How the site installation is being done?Site installation of epoxy coated rebar is co...
BACK 
